ABSTRACT In this study, spoilers were installed on the lobed nozzle principal model. Keeping axial position unchanged, the different widths of spoilers were mounted along the circumferential direction of a mixer tube. The effects of spoilers on the jet mixing of lobed nozzle were investigated by numerical method, and the results showed that, before or after the installation, the flow ratio did not change significantly. The value of thermal mixing efficiency and total pressure recovery coefficient had a corresponding improvement. The spoilers increased the borderline area of the primary and secondary streams, thus the mixing was accelerated. Spoilers can avoid high-temperature primary stream impinging the wall of the tube, and the temperature of mixing tube wall decreased significantly.

ABSTRACT Based on coupled unsteady panel/free-wake method, a universal analysis model was established, which provides a good prediction for the rotor/fuselage unsteady aerodynamic interaction. Considering the deficiencies of the traditional time-marching rotor free-wake algorithms, notably on stability and efficiency, the CB3D algorithm with 3rd-order accuracy is proposed. For solving the problem that part of the wake vortices may penetrate the fuselage, a “material line” rectification method with 3rd-order accuracy is proposed. An analysis for the model accuracy was then conducted to validate the accuracy of the new model, and a comparison against the available experimental data is performed. The simulated results show a good agreement with these experimental data. With the new model, several simulations are conducted for the typical rotor/fuselage aerodynamic interaction, and the results are analyzed.

ABSTRACT: A series of geometric models of lobed nozzles with a central plug was created by different scalloping positions and widths. The shapes of lower and upper edges, cutting depth were kept unchanged. In this study, by the use of numerical simulation, the effects of scalloped width and position on the performance of jet mixing in the pumping condition were analyzed. The results indicated that, as the position of scalloped lower edge kept constant, the radial position of the accelerated mixing region of sidewalls did not change. The accelerated mixing region is enlarged as scalloped width increased, while the growth rate of enlarged region is less than the growth rate of scalloping width. When the scalloped region with the same width moved outward in the radial direction, the mixing rate of the region of the lobe outer edges increased. However, the distance for complete mixing of the primary stream in the core region was increased. It was also found that inward moving of scalloped lower edge enhanced the effect of strengthening streamwise vortices but induced more pressure loss.